Display Panel - JVC HR-S9700EK Instruction Manual

DISPLAY PANEL

1
+ 8
15dB
NORM
8
1 B.E.S.T. Picture System Display lights from
bottom to top while B.E.S.T. is active.
Audio Level Indicator displays audio input and
output levels. pg. 34
2 Programme Time Indicators show the
programme start time ( ) and the programme
stop time ( ) for timer-recording.
3 Symbolic Mode Indicators
PLAY:
FF/REW VARIABLE
SEARCH:
AUDIO DUBBING:
AUDIO DUBBING PAUSE:
INSERT:
INSERT PAUSE:
AV INSERT:
AV INSERT PAUSE:
4 "Timer" Indicator lights when ‰ has been
pressed to engage Timer mode.
5 S-VHS Indicator lights when a cassette marked
S-VHS is inserted with S-VHS mode set to "ON",
when an S-VHS-recorded tape or S-VHS ET-
recorded tape is played back, or when S-VHS ET
mode is engaged.
6 Channel Display shows preset position where
the station currently being received is stored.
Clock Display shows current time.
2 3
4
0
6
VPS/PDC
9 0
!
pg. 20
STILL:
SLOW:
RECORD:
RECORD PAUSE:
pg. 19, 21
pg. 37
pg. 10
4 5 6
VCR
@
7 Tape Speed Indicators display mode of record-
pg. 38 ing; light during Record or Play mode.
8 Audio Mode Indicator displays audio output
mode currently selected.
9 Tape Remaining Time Indicator displays time
remaining on tape when certain buttons are
pressed.
0 "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected.
! PDC Indicator lights when PDC has been
engaged for timer recording.
* VPS (Video Programme System) recording is not
currently available in the U.K. and not possible with
this recorder.
@ VCR Indicator lights when the video recorder is
in the video mode. At this point, the TV auto-
matically enters AV mode.
# Counter shows time elapsed since playback or
recording began. (The counter can display up to
+/– "19:59:59". If the playback or recording time
exceeds this limit, the display starts to count
from "0:00:00".)
With
current tape position to end of tape (
Counter, Preset Position*, Clock and Tape
Remaining Time Display appear alternately
when – –:– – (Display) is pressed.
* Preset Position is not displayed during playback.
$ Mode shows external input mode selected (L-1,
L-2, SAT*, F-1 or S-1).
* When "L-2 SELECT" is set to "SAT" (
appears instead of "L-2".
7
SP
#
$
pg. 35
pg. 17
pg. 14
displayed, shows time remaining from
81
pg. 16
pg. 19, 21
pg. 17).
pg. 52), "SAT"