JVC HR-S9700EK Instruction Manual page 51

A
TV Receiver
21-pin SCART Cable
(not provided)
VIDEO
CHAN-
NEL or
RF Cable
AV mode
(provided)
C
TV Receiver
S-Video Cable
(provided)
21-pin SCART Cable
(not provided)
NOTES:
All necessary cables can be obtained from your dealer.
For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.
When you select "EDIT" to dub tapes in step 3, be sure to select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you
finish dubbing the tapes.
When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (
If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this
recorder's S-VIDEO IN/S OUT and AUDIO IN/OUT connectors.
When Using Your Video Recorder As The Source Player ...
... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck's S-Video and Audio input connectors.
When Using Your Video Recorder As The Recording Deck ...
... connect its front panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors.
Then, set the recorder's input mode to "S-1".
Player
Your recorder
Another recorder
Recorder
Recorder Your recorder
Another recorder
Player
B
Recorder Your recorder
21-pin SCART Cable
(not provided)
Another recorder
Player
51
TV Receiver
RF Cable
(provided)
VIDEO
CHANNEL
or AV mode
pg. 59).