Sena PS100 User Manual page 56

information such as number of logs to be sent, SMTP server, log recipient's mail address and device
mail address.
The device mail address specifies sender's mail address for the log delivery email. Almost every
SMTP servers check sender's mail address with host domain name's validity only. Consequently, for
the device mail address, you can use arbitrary username with registered hostname such as
arbitrary_user@yahoo.com or anybody@sena.com.
-----> 5
Select email log send option ( 1 = Enable, 2 = Disable) : 1
---------------------------------------------------------------------------
System status
---------------------------------------------------------------------------
Select menu
1. Display system status
2. Display log
3. Reset incoming/outgoing statistics
4. Clear log
5. Send log by Email : Enable
6. Number of log message to send a mail(1 - 100) : 5
7. SMTP server : smtp.yourcompany.com
8. PS-400 mail address : PS200@yourcompany.com
9. Log recipient's mail address : admin@yourcompany.com
<ESC> Back, <ENTER> Refresh
----->
Figure 6-4 Email log send configuration
56