Locating Server Configuration - Sena PS100 User Manual

HelloDevice Pro Series can be configured to send its IP address information whenever it is assigned a
new IP address or periodically to a specific server called locating server. You can operate a specific
host as your locating server or you can use your client host as a locating server simultaneously.
No special library or toolkit to implement locating server is provided. You have to implement your
program by yourself using the protocol provided below or contact us.

5.3.2 Locating server configuration

Locating server configuration screen is shown in Figure 5-5. You have to configure locating server IP
address, locating server UDP port number and connection time interval as well as to use locating
server feature or not. Initially locating server feature is configured as "Disabled".
---------------------------------------------------------------------------
Advanced options -> Locating server
---------------------------------------------------------------------------
Select menu
1. Use locating server : Disable
<ESC> Back, <ENTER> Refresh
-----> 1
Do you want to put your information to locating server ? (y/n): y
---------------------------------------------------------------------------
Advanced options -> Locating server
---------------------------------------------------------------------------
Select menu
1. Use locating server : Enable
2. Locating server connection time interval: 1 Min
3. Locating server IP address and port : 192.168.1.211 : 9999
<ESC> Back, <ENTER> Refresh
-----> 2
Enter locating server connection time interval in minutes (1 ~ 3600)
-----> 10
---------------------------------------------------------------------------
Advanced options -> Locating server
---------------------------------------------------------------------------
Select menu
1. Use locating server : Enable
2. Locating server connection time interval: 10 Min
3. Locating server IP address and port : 192.168.1.211 : 9999
<ESC> Back, <ENTER> Refresh
-----> 3
Enter locating server IP address and port (EX: 211.116.26.213:9999)
-----> 211.116.26.213:9999
---------------------------------------------------------------------------
Advanced options -> Locating server
---------------------------------------------------------------------------
Select menu
1. Use locating server : Enable
2. Locating server connection time interval: 10 Min
3. Locating server IP address and port : 211.116.26.213 : 9999
<ESC> Back, <ENTER> Refresh
----->
Figure 5-5. Locating server configuration
52