Sena PS100 User Manual page 28

---------------------------------------------------------------------------
Serial configuration --> port #1
---------------------------------------------------------------------------
Select menu
1. Host mode configuration
2. UART Configuration
3. Cryptography Configuration
4. Option
<ESC> Back, <ENTER> Refresh
----->
Figure 4-2. Initial screen for each serial port configuration
Table 4-1. Hierarchical view of the Serial Port Configuration menu items
TCP Server
TCP Client
Host mode TCP Server/Client
UDP Tunneling
UDP Server
Modem Emulation
RS232
UART
RS485 echo
RS485 non-echo
RS422
None
Cryptography
3DES
Inactivity timeout
Options
Inter-character timeout
Host Mode
Local Port
Host Mode
Destination IP/Port
Cyclic Enable/Disable
Connection
Interval
Host Mode
Local Port
Destination IP/Port
Cyclic Enable/Disable
Connection
Interval
Host Mode
Local Port
Destination IP/Port
Host Mode
Local Port
Host Mode
Type
1200/2400/4800/9600
Baud rate
19200/38400/57600/115200
Data bits 7/8
Parity None/Even/Odd
Stop bits 1/2
Flow control None, Hardware (RTS/CTS)
Always HIGH
DTR behavior
Always LOW
Show TCP connection
None
DSR behavior
Open/Close TCP connection
Accept TCP connection only by HIGH
TYPE, Baud rate, Data bits, Parity, Stop bits
TYPE, Baud rate, Data bits, Parity, Stop bits
TYPE, Baud rate, Data bits, Parity, Stop bits
Method
Method
Key string
28