Display Log Data; Automatic Log Delivery By Email - Sena PS100 User Manual

F/W REV. : V1.00
Cur Status : Running
---------------------------------------------------------------------------
IP information
---------------------------------------------------------------------------
IP Mode : Static
IP Address : 192.168.2.100
Gateway : 192.168.1.1
Primary DNS : 211.172.129.198
---------------------------------------------------------------------------
Port #0 information
---------------------------------------------------------------------------
Connection Mode : Modem Emul
Destination : 192.168.1.120:6010
Incoming bytes : 268492
UART : 9600-N-8-1-Hardware
Inactivity timeout : 300 sec
...
---------------------------------------------------------------------------
Port #3 information
---------------------------------------------------------------------------
Connection Mode : TCP Server
Destination : 192.168.1.120:6013
Incoming bytes : 0
UART : 9600-N-8-1-Hardware
Inactivity timeout : 100 sec
End of Status
Press Enter

6.2 Display log data

Users can see the system log by selecting submenu 2.Display log. Users can also clear current
log data by selecting submenu 4.Clear log.
2002-02-10 04:41:32 > ### No valid log table. Initialize logs ###
2002-02-10 04:41:44 > ### Boot up System Start ###
2002-02-10 04:41:44 > ### Start with Static IP by 192.168.2.100 ###
End of Log
Press Enter

6.3 Automatic log delivery by email

The HelloDevice Pro Series can be configured to send log data automatically if the number of log
messages unsent reaches the pre-defined number. Users can enable this feature by selecting
submenu 5.Send log by email. If this feature is enabled, you have to configure email related
MAC Address : 00-01-95-04-04-33
Current time : 2038/05/10 04:34:10
IP Expiration : N/A
Subnetmask : 255.255.0.0
Receive/Transmit errors : N/A
Secondary DNS : 211.172.129.199
Local port : 6000
Host allowed : 0.0.0.0/0.0.0.0
Outgoing bytes : 285121
Encryption : 3DES
Inter-character timeout : 100 ms
Local port : 6003
Host allowed : 0.0.0.0/0.0.0.0
Outgoing bytes : 0
Encryption : None
Inter-character timeout : 1 ms
Figure 6-2. System status display (PS400)
Figure 6-3. System log display
55