Go Power GP-PWM-30 Owner's Manual page 13

______________________________________________________________________
GP-PWM-30 will begin to limit the current as the battery reaches a full
charge.
Icons Displayed: Sun, Battery, Current Symbol (A)
NOTE:
Non-volatile memory: Any settings made on the GP-PWM-30 will be
saved even when the power has been disconnected from the controller.
Viewing the Controller
display information
To toggle between State of
Charge (SOC), Battery
Voltage and PV Charging
Current, press the B Button.
The battery state of charge is
shown as a percentage.
Icons Displayed: Battery,
Percent Symbol
Push the B Button to show
the battery voltage.
Icons Displayed: Battery,
Volt Symbol (V)
Push the B Button to show
the PV charging current. The
© 2012 Carmanah Technologies Corporation
Solar Controller
GP-PWM-30
13
September 2012