Table of Contents
Advertisement
5. Insert the new battery:
6. Reinstall the riser-card assembly.
7. Reinstall the server cover.
8. Reconnect all external cables and the power cord; then, turn on the peripheral
9. Start the Configuration/Setup Utility program and set configuration parameters.
Completing the installation
Complete the following steps to complete the installation:
1. Reinstall the cover. See "Installing the cover" on page 19 for more information.
2. Install the server in the rack cabinet. See the Rack Installation Instructions that
3. Connect the cables and power cords. See "Connecting the cables" on page 19
4. Update the server configuration. See "Updating the server configuration" on
Attention:
shortly after turning on the server. Operating the server for extended periods of time
(more than 15 minutes) with the server cover removed might damage server
components.
18
xSeries 306 Type 8836: Option Installation Guide
a. Tilt the battery so that you can insert it into the socket.
b. Press down on the battery after you insert it into the socket.
devices and the server.
v Set the system date and time and the user (power-on) password.
v Reconfigure your server.
come with your server for detailed information about how to install the server in
a rack cabinet.
Attention:
v Install your server only in a rack cabinet with perforated doors.
v Do not leave open space above or below an installed server in your rack
cabinet. To help prevent damage to server components, always install a filler
panel to cover the open space and to help ensure proper air circulation. See
the documentation that comes with your rack cabinet for more information.
for more information.
page 20 for more information.
For proper cooling and airflow, replace the server cover before or
Advertisement
Table of Contents
