Safety Notice - Air Techniques ScanX Duo Instruction Manual

This equipment has been designed to minimize exposure of personnel to hazards . While ScanX is
designed for safe operation, certain precautions must be observed . Use of ScanX not in conformance
with the instructions specified in this manual may result in permanent failure of the unit .
General Safety Information.
 Check with your authorized dealer for packing material requirements if it is necessary to return
the product to the manufacturer . Correct packing guarantees optimal safety of the device during
transport . Should it become necessary to return the device to the manufacturer during the warranty
period, Air Techniques will not accept claims for damage arising from using incorrect packing
materials .
 Before every use, the operator must check the functional safety and the condition of the device .
 The operator must be knowledgeable in the operation of the device .
 This device is not to be used in any areas where the atmosphere could cause fire or explosion .
Markings.
The following terms or symbols are used on the equipment, on the serial number label or in this
manual to denote information of special importance:
2
Air Techniques, Inc.
ScanX is a Class I Laser Product
CAUTION
CLASS 1 LASER PRODUCT
[Class 1 Laser Product (IEC)]
CLASS 3B LASER
RADIATION WHEN OPEN This warning label identifies ScanX as such a product and
AVOID EXPOSURE TO BEAM
DANGER describes the potential danger to humans in the event the prod-
uct is opened during service . There is no laser radiation from
LASER RADIATION WHEN OPEN
AVOID DIRECT
this product when operated and maintained as instructed .
EXPOSURE TO BEAM
COVER REMOVED MAKES
The Laser Product Accession Number is 0212282-00
THIS DEVICE A
CLASS IIIb LASER PRODUCT
Alerts users to important Operating
and Maintenance instructions . Read
carefully to avoid any problems .
Warns users that uninsulated voltage
within the unit may be of sufficient
magnitude to cause electric shock .
Indicates item used only
once . Discard after use .
Identifies the name of the
manufacturer .

safeTy noTIce

MEDICAL ELECTRICAL EQUIPMENT
WITH RESPECT TO ELECTRICAL SHOCK, FIRE,
MECHANICAL AND OTHER SPECIFIED HAZARDS ONLY
IN ACCORDANCE WITH
UL-60601-1, CAN/CSA C22.2 NO.601.1
66CA
Indicates date of manufacture .
Page 3