Technical Data - Air Techniques ScanX Duo Instruction Manual

Electrical Requirements:
Supply Voltage:
Supply Current:
Line Cord:
Physical Properties:
Depth
Width
Height
Weight
Environmental Conditions:
Unit in Operation
Temperature:
Humidity:
Heat emission
Storage and Transport
Temperature:
Humidity:
Note: Resolution of ScanX is dependent on operating mode and specific imaging plate type used.
Resolution Range:
Horizontal:
Vertical:
Compliance Data:
Laser Class:
Laser Product Report
Accession Number:
Installation Category:
Pollution Degree:
User Replacement Items:
IEC601-1 Classification:
Class 1, Type B, Transportable, Continuous Operation,
Equipment not suitable for use in the presence of flammable anaesthetic mixture(s) .
Electromagnetic Interference:
Electromagnetic interference between the equipment and other devices can occur . Do not use
the equipment in close conjunction with sensitive devices, or devices creating high electromag-
netic disturbances .
Electromagnetic Compatibility
Air Techniques, Inc.
100 to 240VAC +/- 10%, 50/60 Hz
2 A Maximum
North American style 10 foot long
Hospital Grade power cord, P/N 73096 .
10 inches (26 cm)
3/8
10 inches (25 cm)
12 inches (30 cm)
21 pounds (10 kg)
50°F to 105°F (10°C to 40°C)
5% to 95% RH
<40W
-21°F to 130°F (-29°C to 54°C)
5% - 95% (Non-condensing)
10 to 12 (lp/mm)
10 to 18+ (lp/mm)
Class I Laser Product (21 CFR 1040 .10)
Class 1 Laser Product (IEC 60825-1)
0212282-00
I
2
Line Cord, Plate Guides, PSPs
and Computer Connector Cable
Conforms to IEC 60601-1-2 See Appendix A .

TechnIcal daTa

Page 11