Appendix A - Emc Data - Air Techniques ScanX Duo Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Electromagnetic Compatibility (EMC) Compliance Information

The following provides the EMC technical data used to show that each ScanX is designed and manu-

factured to meet the electromagnetic requirements of International standard IEC 60601-1-2 as shown

below . The user should ensure that the ScanX unit is indeed used within this environment to ensure that the

system will perform as intended .

Portable and mobile RF communications equipment can affect ScanX operation .



Use of accessories or cables other than those specified or provided by Air Techniques may



result in increased ScanX emissions and decreased ScanX immunity .

The ScanX should not be used adjacent to or stacked with other equipment that may inter-



fere with proper ScanX operation .

Manufacturer's Guidance and Declaration - Electromagnetic Emissions

The ScanX is intended to be used within the electromagnetic environment specified below. The

user of the ScanX should assure that it is used in such an environment.

Emissions test

RF emissions

ClSPR 11

RF emissions

ClSPR 11

Harmonic emissions

EN 61000-3-2

Voltage fluctuations/flicker

EN 61000-3-3

Air Techniques, Inc.

Compliance

Group 1

The ScanX uses radio-electrical energy only for

its internal subsystems. Therefore, it emits very

low energy and is not likely to interfere with nearby

electronic devices.

Class A

The ScanX is suitable for use in all establishments

other than domestic, and may be used in domestic

establishments and those directly connected to the

public low voltage power supply network that supplies

buildings used for domestic purposes, provided that

Class A

the following warning is heeded:

Warning: This equipment is intended for use by

healthcare professionals only. This equipment may

Complies

cause radio interference or may disrupt the operation

of nearly equipment. It may be necessary to take

mitigation measures, such as reorienting or relocating

the ScanX or shielding the location.