S-Video Connection - JVC HR-S7700EK Instructions Manual

Back of TV
Aerial connector
Mains outlet
Back of Recorder

S-VIDEO CONNECTION

To connect to a TV with S-VIDEO/AUDIO IN connectors . . .
1– Connect the aerial, recorder and TV as per "RF CONNEC-
TION" ( pg. 6).
2– Connect the recorder's S OUT connector to the TV's
S-VIDEO IN connector.
3– Connect the recorder's AUDIO OUT connectors to the TV's
AUDIO IN connectors.
ATTENTION
Do NOT Plug the mains power cord into a mains outlet until all connections are completed.
Do NOT press the
power before you start the Auto Set Up procedure described on page 8.
AUDIO IN connectors
S-Video cable
(not provided)
S-VIDEO IN connector
Mains Power Cord
RF Cable (provided)
button on the recorder or on the remote control to turn on the recorder's
Audio cable
(not provided)
NOTES:
You can obtain high-quality S-VHS pictures.
With S-VIDEO connection, you cannot use the Preset
Download function. (
If your television is not stereo-capable, use the recorder's
AUDIO OUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction. (
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to the VIDEO (or AV mode).
For switching the TV's mode, refer to the instruction manual
of your television.
AFTER YOU FINISH THIS STEP
pg. 9)
pg. 44)
Go to Step 3 – AUTO SET UP
7