Edit To Or From Another Video; Recorder - JVC HR-S7700EK Instructions Manual

34
Edit To Or
From Another
Video

Recorder

1
4
7
AUX
1
– –:– –
2 3
2
5 6
8 9
4
0
PR
?
ADVANCED OPERATIONS (cont.)
You can use your video recorder as the source player or as the
recording deck.
MAKE CONNECTIONS
1
Connect the player's 21-pin SCART connector to the
recorder's 21-pin SCART connector as illustrated on
page 35.
A When Using Your Video Recorder As The Source
Player ...
... connect its AV1 (L-1) IN/OUT connector to the
recording deck.
B When Using Your Video Recorder As The Recording
Deck ...
... connect its AV2 (L-2) IN/DECODER or AV1 (L-1)
IN/OUT connector to the source player.
C If Another Recorder Is Compatible With The Y/C
Signal ...
... connect your recorder 's AV1 (L-1) IN/OUT
connector to another recorder.
With C connection ...
When using your recorder as the recording deck, set
"L-1 INPUT" to "S-VIDEO" and "L-2 SELECT" to "A/V"
( pg. 36).
When using your recorder as the source player, set
"L-1 OUTPUT" to "S-VIDEO" (
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. With this video recorder, press AUX and/or
PR to select "L-1" for the AV1 (L-1) IN/OUT connector,
or "L-2" for the AV2 (L-2) IN/DECODER connector,
depending on the connector being used.
When using the AV2 (L-2) IN/DECODER connector,
set "L-2 SELECT" to the appropriate mode. (
SET EDIT MODE
3
See "Picture Control" on page 32.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
pg. 36).
pg. 36)