Display Panel - JVC HR-S7700EK Instructions Manual

DISPLAY PANEL

1
+ 8
4
0
6
15dB
NORM
9
1 B.E.S.T. Picture System Display lights from
bottom to top while B.E.S.T. is active.
Audio Level Indicator displays audio input and
output levels.
2 Programme Time Indicators show the
programme start time ( ) and the programme
stop time ( ) for timer-recording.
3 Symbolic Mode Indicators
PLAY:
FF/REW VARIABLE
SEARCH:
AUDIO DUBBING:
AUDIO DUBBING PAUSE:
INSERT:
INSERT PAUSE:
AV INSERT:
AV INSERT PAUSE:
4 "Timer" Indicator lights when ‰ has been
pressed to engage Timer mode.
5 S-VHS Indicator lights when a cassette marked
S-VHS is inserted with S-VHS mode set to "ON",
when an S-VHS-recorded tape or S-VHS ET-
recorded tape is played back, or when S-VHS ET
mode is engaged.
6 Channel Display shows preset position where
the station currently being received is stored.
Clock Display shows current time.
2 3
VPS/PDC
VCR
0 ! #
@
pg. 28
pg. 20
STILL:
SLOW:
RECORD:
RECORD PAUSE:
pg. 19, 21
pg. 27
pg. 10
4 5 6
SP
$
7 Tape Speed Indicators display mode of record-
ing; light during Record or Play mode.
* EP is only for NTSC playback.
8 Instant REVIEW Indicator blinks after timer-
recording and shows how many programmes
have been timer-recorded.
9 Audio Mode Indicator displays audio output
mode currently selected.
0 Tape Remaining Time Indicator displays time
remaining on tape when certain buttons are
pressed. pg. 17
! "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected.
@ PDC Indicator lights when PDC has been
engaged for timer recording.
* VPS (Video Programme System) recording is not
currently available in the U.K. and not possible with
this recorder.
# VCR Indicator lights when the video recorder is
in the video mode. At this point, the TV auto-
matically enters AV mode.
$ Counter shows time elapsed since playback or
recording began.
With displayed, shows time remaining from
current tape position to end of tape (
Counter, Preset Position*, Clock and Tape
Remaining Time Display appear alternately
when – –:– – (Display) is pressed.
* Preset Position is not displayed during playback.
% Mode shows external input mode selected (L-1,
L-2, SAT*, F-1 or S-1).
* When "L-2 SELECT" is set to "SAT" (
appears instead of "L-2".
7 8
REVIEW
%
pg. 26
pg. 25
pg. 19, 21
pg. 14
pg. 36), "SAT"
61
pg. 16
pg. 17).