Invacare 9000 SL Service Manual page 33

NOTE: Charts 1 to 8 apply to adult/hemi frame styles only. Refer to the charts for seat‐to‐floor
height settings for adult/tall (Adult/Tall Frame Style on page 31) and super low frame styles
(Super Low Frame Style on page 31) and Changing Seat‐to‐Floor Height on page 77 for recliner
frame styles.
Chart 1 - Seat-to-Floor Height of 19½ inches and 3° Angle
REAR WHEEL POSITION
OFFSET AXLE OPTION
FORWARD* REARWARD
Hole 1
Hole 1
Hole 3
*NOTE: This offset axle plate position requires the caster headtube to be leading to provide
adequate tire clearance between the rear tire and the front caster. Refer to Converting from Trailing
to Leading or Leading to Trailing Casters on page 27.
Chart 2 - Seat-to-Floor Height of 19½ inches and 6° Angle
REAR WHEEL POSITION
OFFSET AXLE OPTION
FORWARD* REARWARD
Hole 4
Hole 4
Hole 2
*NOTE: This offset axle plate position requires the caster headtube to be leading to provide
adequate tire clearance between the rear tire and the front caster. Refer to Converting from Trailing
to Leading or Leading to Trailing Casters on page 27.
Part No. 1076155
STANDARD
Hole 3
STANDARD
N/A for this
frame style
Hole 2
33
SECTION 5—SEAT TO FLOOR
ANTI-TIP
PART/MODEL
MOUNTING
NUMBERS
POSITION
1360 On-Chair
1058836
Off-Chair
ANTI-TIP
PART/MODEL
MOUNTING
NUMBERS
POSITION
N/A On-Chair
1113766
Off-Chair
FRONT CASTER
ADJC CAM
POSITION
Front
Notch
FRONT CASTER
ADJC CAM
POSITION
Front
Notch
9000 Series