Setting Up Centralized Management - Cisco 4400G Quick Start Manual

To confirm your choices and to implement them until
Step 5
you change them or until you restart your DMP,
click Apply.
To test if your choices are suitable ones for your DMP
Step 6
display, click Show IP in the DMP Mode area.
Your DMP display should show a Cisco logo and
should show the IP address for your DMP.
To make your configuration changes permanent, even
Step 7
after you restart your DMP, do the following:
a. Choose Administration > Save Configuration.
b. On the Save Configuration page, click Save.
9

Setting Up Centralized Management

If your DMP will be managed centrally as part of a digital
signage network, you must configure DMPDM and DMM-DSM
to work together.
To stop untrusted DMM appliances from being
Caution
able to seize control of your DMPs, you must
configure your network firewall to restrict which
devices you will permit to send inbound traffic to
22