Cisco 4400G Quick Start Manual page 11

• If you will connect your DMP to an analog display,
do all of the following:
–
–
Connect the other end of the cable (or cables) to the
Step 2
corresponding interface (or interfaces) on your
DMP display.
If the DMP display is not already turned on, turn it
Step 3
on now.
5
Connecting to a 100V–240V
AC Socket
Warning Use only the supplied power cable and adapter.
Connect the DMP power cable to the AC adapter.
Step 1
Connect the DC barrel connector to the 12V DC power
Step 2
supply on the DMP chassis.
Plug one yellow jack on the RCA video cable
into the CVBS interface on your DMP.
Plug the 3mm jack on the RCA audio cable
into the AUDIO interface on your DMP.
11