Installation; During Use; Cleaning, Maintenance & Service - Smeg CHIMNEY COOKER HOOD User Manual

Installation

This appliance must be installed or repaired by a qualified technician only.
It is dangerous to modify any part of this appliance.
The manufacturer declines all responsibility in case of failure to adopt proper safety
measures.
Ensure the location in which this appliance is installed has good, permanent ventila-
tion.
In ducted mode, there must be one or more permanent air inlet. The air collected must
not be discharged into a duct used to blow off smoke from other appliances fed with
electricity.
The distance between the bench to the lower part of the hood must not be less than
65cm.
Use an electrical connector with earth that is correct for your location.
Check that the voltage in your area correspond to the appliance as indicated on the
rating label.
Do not connect the hood to a duct that carries combustion fumes (e.g. fireplace).

During use

This product is designed for household use only and should never be used for com-
mercial applications.
After use, always ensure that all controls are in the "OFF" position.
When frying with a gas flame, take particular care not to allow the oil or grease in the
pan to catch fire.
Do not use the range hood lights as night lights.
Cleaning, Maintenance & Service
Clean the grease filters often (at least once monthly). Heavy oil deposits is a fire haz-
ard. Hood surface should be cleaned with soft cloth and non-corrosive detergent.
Important: Never attempt to repair this appliance by yourself. Always refer to qualified
Service Technicians.
4