Cleaning & Maintenance; Installation - Smeg CHIMNEY COOKER HOOD User Manual

Cleaning & Maintenance
ALWAYS SWITCH OFF AND UNPLUG FIRST!
SURFACES:
Wash with warm soapy water and a soft sponge. Never use abrasive detergent,
scouring pads, steel wool or solvents on any part of this appliance as this will cause
irreparable damage.

4. Installation

Use suitable bolts to mount the appliance on a secure surface.
The minimum distance between the bench top and the lowest part of the hood must
not be less than 65cm
The location of the installation must have permanent openings for ventilation.
Regulations concerning the discharge of air have to be fulfilled.
It is strongly recommended that the hood be installed right over the exhaust air from
cooking.
It is better not to install the outlet of the pipe in the wind direction, as this could restrict
the flow of the exhaust air.
Fasten the components for the exhaust outlet with screws. To ensure a good flow of
exhaust air, the amount of bends must be limited, as each bend will cause a re-
sistance and limit the air flow.
9