Planet ICA-4130S User Manual page 27

To use this function, the settings on SIP page must be configured properly.
1. Before using the SIP, you need to register an account for the camera from the SIP server;
2. Register another user account for the SIP device from the same SIP server;
3. Call the camera User ID from the SIP device; you will get the video on the SIP device.
Parameter
Unregistered
Enable
Register Status
User ID
Password
User Name
Server IP
Server Port
Enable Audio in SIP
Call
SIP registration status. Display "Unregistered" or "Registered"
Start or stop using SIP
Choose to use Enable mode or Disable mode. Enable mode
means to use with a registered account. Disable mode refers to
SIP without a registered account; just use the IP address to call.
SIP username, or telephone number from ITSP
SIP account password
SIP account name
FQDN or IP of SIP server from VoIP service provider.(IPPBX)
The default server port is 5060
Start or stop using Audio
27
Ultra-mini SIP PoE IP Camera
ICA-4130S/ICA-4230S
Description