Specifications - GRAUPNER Polaron EX Operating Instructions Manual

- Connect the battery pack to a balance board. Without this connection, either the batteries
or the charger may be damaged.
- Do not charge a battery with a voltage below 2.8V per cell. If this type of battery is forced
to charge, the pack can be damaged and, in extreme cases, can result in a fire.
- The default charging current is 1C. Monitor the voltage and the temperature of batteries
during charging operations that may exceed 1C.
- Do not charge Lithium Polymer battery packs to values that exceed 4.2V per cell.
- Always disconnect the battery after charging. Allow the charger to cool between the charges.
- Do not charge the batteries inside a car. Never use a cigarette socket as a power source.
- Do not charge the batteries using a digital camera, a camcorder, or a cell phone, as the power
source.
- Please use insulating gloves during the handling of the batteries, the charger or the wires.
Failure to do so may cause personal injury, as the voltage differential between the input and the
output can result in the formation of sparks.
7

◎ SPECIFICATIONS

MODE
Power source 11-28V External DC Power Supply (Docking system)
Display TFT 3.0" LCD W/ Touch screen
NiCd, NiMH / 1-14 cells / each channel
Battery Type & Cells LiPo, LiFe, LiIo / 1-7 cells / each channel
Pb / 1-12 cells (2V/cell) / each channel
Output 2 Channels (400W x 2CH = 800W)
Charge Current 0.1 - 20.0A (100mA steps) / Max. 400W-24V; Max. 220W-12V
Discharge Current 0.1 - 10.0A (100mA steps) / Max. 60W
Discharge, Charge to Discharge / Discharge to Charge /
Cycling
Charge to Discharge
Balancing current Max. 350mA
USB 5V output (5.0V 2.5A ) / USB B-Type
USB
Servo Test, Motor Test, Warmer, ESC setting
Sub Function
Firmware upgrade External Mini USB device
PC communication Graupner/SJ Logging Software
Languages Optional (Primarily English)
50 x 50 x 10mm x 2ea Dynamic Cooling Fan
Cooling system
Ext. Module socket Futaba 3P socket
Motor Test socket ZHR
Servo Test socket Futaba 3P socket
Each channel contains 20 memories (20ea x 2CH = 40 memories)
Memory
Yes
SMPS Docking Terminal
Dimensions 88.2 x 203.4 x 196.3 mm / 3.47 x 8.00 x 7.73 inches
Weight 1368 g / 48.25 oz
SPECIFICATION
8