Installation; Installing Junction Box; Protecting The Surface Of The Cooktop; Attach Foam Strip - GE Monogram ZEU30R Installation Instructions Manual

Installing
Install an approved junction box where it
will be easily reached through the front of
the
the cabinet where the cooktop will be
Junction
located. The cooktop conduit is 3 feet long,
Box.
Protect
Place a towel or table cloth onto the counter
Surface of
top. Lay the cooktop upside down onto the
protected surface.
Cooktop
Attach
Apply the foam strips around the outer edge
Foam Stips
of the glass. Do not overlap the foam strips
Locate
Remove the hold down brackets and
screws from the literature package.
Mounting
Parts
Attach
Screw the Hold Down Bracket to the side of
Brackets to
the cooktop unit. Repeat for opposite side
Cooktop
of cooktop.
IMPORTANT: The junction
box must be located where it
!
will allow considerable slack in
the conduit for serviceability.

Installation

Electronic Radiant Cooktop
Install junction box
so that it can be reached
through the front of
the cabinet.
Bottom of cooktop
Cloth under Cooktop
Bottom of
Cooktop
.
Cooktop
Glass
MOUNTING
SCREW
Bottom of
Cooktop
Cooktop
Glass
(Continued on following page)
16"
Min.
Foam Strips
Pre-drilled
hole
Foam Strips
5