Arming / Disarming Via The Internal Tag Reader; Arming Partitions / Arm Modes Via The Internal Tag Reader - Pyronix PCX 256 User Manual

P C X 2 5 6 U S E R M A N U A L
2 . 3 A r m i n g / D i s a r m i n g V i a T h e I n t e r n a l T a g R e a d e r
Once the relevant cards/tags have been programmed into the system (see page 'Change Codes'
page 22), you may arm and disarm via the internal tag reader.
Please note that 'Flexi-Arm' may need to be disabled so that the card will arm the assigned
partitions automatically. This is described on page: 24.

2.3.1 Arming Partitions / Arm Modes via the Internal Tag Reader

1. To arm the system, hold up a valid card/tag until the left UNSET LED illuminates, and remove
the card/tag. The system will begin to arm.
NOTE: The system will only arm depending on what 'Exit Mode' is programmed. This would
have been selected by your engineer. For example:
If Timed is selected the system will arm after the exit time has expired.
If Final Door is selected, the system will only arm after the entry/exit door has been opened/closed.
If PTS (Push To Set) is selected, the system will only arm after the Push To Set button has been
pushed.
Page: 14
Power
Alarm
Tamper
Fault
Unset
Tag
RINS867-2