Swiss Military Manual page 11

3. Read the seconds, minutes, and hours on the appropriate dials (see the sec-
tion of this manual that corresponds to your watch for dial identification).
4. To reset the stopwatch to zero, push the bottom pusher.
Note: The clock function will continue to operate while using the stopwatch.
Using the Split-Timing Function
1. Press the top pusher to start the stopwatch.
2. To read a lap or other intermediate segment of time, push the bottom push-
er. The watch hands will stop, but the watch will continue to time the total
event internally.
3. To resume timing the total event, push the bottom pusher again.
4. You may repeat this as often as you like. The internal clock will continue to
time the total event each time you repeat the process.
5. To stop timing the total event, push the top pusher.
6. Reset the stopwatch to zero by pushing the bottom pusher.
11