Removing The Latch-Door & Switch-Door Plunger - Samsung FTQ353IWUB Service Manual

3. Disassembly and Reassembly
3-4 Removing The Latch-Door & Switch-Door Plunger
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
CAUTION
When you work on the electric range, be careful when handling the sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Latch-Door
& Switch-
Door
Plunger
Explaination Photo
15
Explaination
1. Turn off the electrical supply going to the range .
. Open the oven door .
3. Raise the cooktop (see page 13 for the
procedure) .
4. To remove the Latch-Door:
a) Remove the 2 screws from the front of cavity .
b) Remove two screw from Cover-Back Main and
remove latch-door
5. To remove the Switch-Door Plunger
a) Remove the Cover-Back Guard Wire (see
page 11 for the procedure) .
b) Release the wire from Cable Clamp .
c) Remove the Switch-Door Plunger from the
range . take out carefully with shaking up and
down by using tool .