Removing The Panel-Side - Samsung FTQ353IWUB Service Manual

3. Disassembly and Reassembly

3-13 Removing The Panel-Side

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
PRECAUTION
When you work on the electric range, be careful when handling the sheet metal parts . Sharp edges may
be present, and you can cut yourself if you are not careful .
Parts
Panel
Side
Explaination Photo
7
Explaination
1. Turn off the electrical supply .
. Remove the oven door from the range
(see page 3-10 for the procedure) .
3. Pull the range away from the wall so
you can access the back of the unit .
4. Remove the 8 screws from the rear of
Panel-Side and remove Cooktop (see
step 3~4 on page 3-3) .
5. Remove the (each) 3screws from the
top the Panel-Side .
6. Pull the back of the side panel out from
the range approximately 10˚
7. Push forward and remove Panel-Side .