Security Button; Product Description; Usage Of P-Link Wifi With Other Powerline Devices; Configuring A Network Between P-Link Wifi And P-Link - Tele System P-Link WiFi User Manual

TELE System
Within 2 minutes press WPS client button (or start WPS via software on the device you want to connect to WiFi
•
network of P-Link WiFi)
Please consider that the WPS LED will go off when the WPS procedure will be completed (both in case of success
or fail).

4.2 Security button

Also Security button has different features with regards to the holding time of the button itself. The main function is to
protect data exchange among the powerline devices by adding an encryption. By pressing and holding the button from 1
to 3 seconds, P-Link WiFi will connect to the existent powerline network (of P-Link 0.2). If the button is pressed and
holded from 5 to 8 seconds, P-Link WiFi will generate a random password for encrypting the powerline network and i twill
leave the existing powerlne network (of P-Link 0.2). If the button is holded from 10 and 15 seconds, then a factory reset
is performed, that is the powerline part of the device is restored to its factory settings.

5 Product Description

For P-Link 0.3 WiFi kit (prod. code: 23500059):
The kit consists in 2 devices: 1 P-Link WiFi and 1 P-Link 0.2.
For P-Link 0.3 WiFi (prod. code: 23500060):
The product box consists in 1 device only: P-Link WiFi.
Usage of P-Link 0.2 (for P-Link 0.3 WiFi kit only):
P-Link 0.2 is an high-performance powerline device (up to 500 Mbps (PHY)) that allows the user to send data by using
the electrical system. This device can only work by coupling it with at least another device (a transmitter and a receiver).
In this kit P-Link 0.2 should be used as the transmitter (by connecting it to your broadband modem/router via ethernet
cable) while P-Link WiFi works as a receiver, that is it receives the data sent by P-Link 0.2. You can find the complete
User Manual of P-Link 0.2 here: http://www.telesystem-world.com/plink02.
Usage of P-Link WiFi:
P-Link WiFi is a powerline device with also wireless features.It can generate a wifi network and it can be used both with
and without any other powerline device (by using only its wireless features).
If it is used inside a P-Link 0.2 network, P-Link WiFi can receive the data sent by the P-Link 0.2 transmitter and then in
can send these data packets in 2 different ways:
to the device connected via ethernet cable to P-Link WiFi (like TV, digital decoders, game consoles and so on)
•
by using its wireless network: P-Link WiFi generates its own wireless network and it can send the received data
•
to all the wireless client connected to its network
P-Link WiFi can be used without the need to have any other powerline devices. By using the product in this way, P-Link
WiFi must be connected via ethernet to your broadband modem/router and it can generate a wireless network and
share internet with all the wireless active clients.
6 Installation
Please read carefully the following instructions before using the device. Only in this way the device can be used properly.
We recommend to keep this user guide as reference.
P-Link WiFi can be used in two different ways:
1. within a network of P-Link 0.2 devices
2. without the need of any other powerline device
The first usage can help the user to extend your own network by using powerline devices while the second usage is
mainly oriented to the wireless capabilities of P-Link WiFi. In next sections you can find more details on the usage of P-
Link WiFi.

6.1 Usage of P-Link WiFi with other powerline devices

You can use P-Link WiFi with other powerline devices if you have P-Link 0.3 WiFi Kit or if you already had a P-Link 0.2
powerline network inside your home network.

6.1.1 Configuring a network between P-Link WiFi and P-Link 0.2

If the user purchased P-Link 0.3 WiFi kit, he will find into the product box both a P-Link WiFi device (you can easily
recognize it thanks to the external antennas) and a P-Link 0.2 powerline. With those 2 devices it is possible to extend
your own local network in the following way:
Connect P-Link 0.2 to your modem/router by using the ethernet cable in the product box.
•
Connect P-Link 0.2 to a power socket (please avoid to use multiple power socket because this can strongly
•
affect the speed rate for transmission).
Connect P-Link WiFi to another power socket. P-Link WiFi will receive the data transmitted from the P-Link 0.2
•
device attached to the modem/router and it can send the received data using both ethernet port (in order to give
internet access to a device which has only ethernet interface) and its WiFi network (in order to give internet
access to all the clients connected to that WiFi network).
Now the network between P-Link 0.2 and P-Link WiFi is working. For any further detail about the configuration of P-Link
WiFi please see chapter 6 and 7.
NOTE
!
4