Led Indicators; Contents Inside Product Box; Wps/Reset Button - Tele System P-Link WiFi User Manual

3 Contents inside product box

Please check that all the items listed below are inside the product box. If any items is missing or damaged, contact the
store which sells the product. We recommend you to keep the original box in case you need to send the device to
assistance.
For P-Link WiFi (product code 23500060):
Name
P-Link WiFi
User Manual
LAN Cable
Warranty
For P-Link 0.3 WiFi kit (product code 23500059):
Name
P-Link WiFi
P-Link 0.2
User Manual
LAN Cable
Warranty

4 LED indicators

P-Link Wi-Fi
1. WLAN: activity indicator for WiFi network
2. WPS: indicator for WPS status (the LED is on if WPS
pairing is on-going)
3. LAN: indicator for LAN status (off is ethernet cable
disconnected, blinking if data are transmitted)
4. PLC: powerline activity indicator
5. PWR: on if the device is switched on, off otherwise
6. WPS/Reset: WPS/Reset button
7. Ethernet: ethernet port for ethernet cable connection
8. Security: security button for encrypting powerline
network
9. Plug: to be inserted in power socket
10. Antennas: 2 external antennas for WiFi

4.1 WPS/Reset button

WPS/Reset button has several features with regards to the holding time of the button itself. If the button is pressed and
hold on for more than 10 seconds, then a factory reset is performed, that is the wifi part of the device is restored to its
factory settings. If the button is pressed and hold on for 1-2 seconds, then the WPS pairing process is started. The WPS
(WiFi Protected Setup) is a protocol that allows the connection of 2 devices using a wifi network without the need to digit
any wifi network password. For P-Link WiFi, the WPS could be useful for connecting a wifi client to P-Link WiFi. In order
to start the WPS procedure, please follow the procedure here below:
Press WPS button on P-Link WiFi for about 1 second. WPS LED will switch on (WPS procedure is started)
•
Quantity Description
1 Powerline with Wi-Fi features
1 User Manual
1 Cable to be used for Ethernet connection
1 Warranty card
Quantity Description
1 Powerline with Wi-Fi features
1 Powerline
1 User Manual
2 Cables to be used for Ethernet connection
1 Warranty card
P-Link 0.2 (this can be found only in the kit version)
1. LAN: indicator for LAN status (off is ethernet cable
disconnected, blinking if data are transmitted)
2. PLC: powerline activity indicator
3. PWR: on if the device is switched on, off otherwise
4. Security: security button for encrypting powerline
network
5. Ethernet: ethernet port for ethernet cable connection
6. Plug: to be inserted in power socket
P-Link WiFi / P-Link 0.3 WiFi Kit
3