Page 3
(wall socket or multiple power socket). TELE System Electronic Srl states that, due to hardware or software changes (needed to improve the product itself), the user could find differences between the content of this user guide and the product.
P-Link 0.2 1 Safety Regulation We advise you to read the following advice concerning the safety regulations carefully in order to ensure safe use of the appliance. ELECTRICAL SUPPLY The appliance should be supplied by using a voltage of 100-240 Volt AC, 50/60 Hz. The appliance must not be repaired in any way by the user, in case of breakages or failures please refer to the nearest center for assistance.
PCs can be connected to P-Link 0.2 by using ethernet interface. Moreover the communication between 2 P-Link 0.2 can cover a distance up to 300 meters allowing the user to extend its broadband connection without the need of wiring.
This section can help the user in connecting P-Link 0.2 to a computer (or other network device). In order to connect P-Link 0.2 you need to follow the steps below: 1. Use the ethernet cable in the package in order to connect P-Link 0.2 to the ethernet port of your PC (or network device) 2.
(for 1 second) within 2 minutes. Now the new P-Link 0.2 is connected to the existent network. In order to add other P-Link 0.2 you need to do again the same procedure described above.
P-Link 0.2 3 Technical Specifications Standard Ethernet IEEE 802.3, IEEE 802.3X, IEEE 802.3U, Auto MDI/X, HomePlug AV Protocols CSMA/CA via electrical system Speed up to 500 Mbps (PHY) Modulation ODFM-1155 carriers, 1024/256/64-QAM, QPSK, BPSK Range max 300 meters Encryption 128-bit AES via powerline, Encryption activated by pressing security button on...
Page 12
Powerline Adapter TELE System P-Link 0.2 CE conformity declaration TELE System Electronic states that this product meets the basic European requirements of 1999/5/EC, including 2004/108/EC (EMC - Electromagnetic Compatibility) and 2006/95/EC (LVD - Low Voltage Directive), 2009/125/CE (Eup/Erp) and 2002/95/UE (RoHS).