1. Manuals
  2. Brands
  3. Tele System Manuals
  4. Adapter
  5. P-Link Nano
  6. User manual

Tele System P-Link Nano User Manual

Powerline adapter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Tele System P-Link Nano

Summary of Contents for Tele System P-Link Nano

  • Page 3 TELE System P-Link 0.2, TELE System P-Link 0.3, Fuba PLK200. TELE System Electronic Srl states that, due to hardware or software changes (needed to improve the product itself), the user could find differences between the content of this user guide and the product.

  • Page 5: Table Of Contents

    ....... . . 2.4.1.2 Expand an existent network by adding a new P-Link Nano ......

  • Page 6: Safety Regulation

    P-Link Nano 1 Safety Regulation We advise you to read the following advice concerning the safety regulations carefully in order to ensure safe use of the appliance. ELECTRICAL SUPPLY The appliance should be supplied by using a voltage of 100-240 Volt AC, 50/60 Hz. The appliance must not be repaired in any way by the user, in case of breakages or failures please refer to the nearest center for assistance.

  • Page 7: Installation

    PCs can be connected to P-Link Nano by using ethernet interface. Moreover the communication between 2 P-Link Nano can cover a distance up to 300 meters allowing the user to extend its broadband connection without the need of wiring.

  • Page 8: Basic Usage Of P-Link Nano

    2. Use the ethernet cable in the package in order to connect the second P-Link Nano to the ethernet port of your PC (or network device) and plug P-Link Nano in a power socket.

  • Page 9: Advanced Usage Of P-Link Nano

    2.4.2 Factory Reset If you want to come back to factory settings for P-Link Nano you can do it by simply press and hold the RESET/PAIR button of the device for about 12 seconds (that is until the power led blinks).

  • Page 10: Technical Specifications

    P-Link Nano 3 Technical Specifications Standard Ethernet IEEE 802.3,IEEE 802.3U HomePlug AV Protocols CSMA/CA via electrical system Speed up to 200 Mbps (PHY) Modulation 1024/256/64/16/8-QAM, QPSK, BPSK, ROBO Range max 300 meters Encryption 128-bit AES via powerline, Encryption activated by pressing security button on...
  • Page 12 Powerline Adapter TELE System P-Link Nano CE conformity declaration TELE System Electronic states that this product meets the basic European requirements of 1999/5/EC, including 2004/108/EC (EMC - Electromagnetic Compatibility) and 2006/95/EC (LVD - Low Voltage Directive), 2009/125/CE (Eup/Erp) and 2002/95/UE (RoHS).

Table of Contents