Touch Pad Assembly; Removing The Touch Pad Assembly; Figure 4.21 Removing The Touch Pad Light Bar - Toshiba M645-S4080 Maintenance Manual

4.12 Touch Pad Assembly

4.12 Touch Pad Assembly

Removing the touch pad Assembly

Remove the touchpad assembly according to the following procedures and Figures 4.21 and 4.22.
1. Remove the two M2.5x3 screws securing the touch pad light bar to the back of the logic
upper assembly and then remove the touch pad light bar, as indicated in Figure 4.21.
2. Unlock and disconnect the touch pad switch board FFC from the touch pad.
3. Disconnect the fingerprint board FFC from the touch pad switch board (if the fingerprint
board is present).
4. Remove one M2.5x4 screw securing the touch pad switch board to the logic upper
assembly, and remove the touch pad switch board.
Satellite M600/M640/M645/M647 Maintenance Manual
Downloaded from LpManual.com Manuals
M2.5x3*2

Figure 4.21 Removing the touch pad light bar

4 Replacement Procedures
4-35