Sherwood RD-6505 Operating Instructions Manual page 35

RD-6505(A)_100223_RD-5503(g) 2010-05-11 오전 9:52 페이지 35
When selecting the DISTANCE
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the DISTANCE, then press the ENTER
button.
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the desired item.
■Note :
• You cannot select the speakers set to "N (No)".
3.
Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to set the selected item as desired.
■When selecting the desired unit
• You can select either "FT (Feet)" or "M (Meter)".
• Once a unit is selected, the distances are
automatically changed in the selected unit.
■When setting the distance
• You can set the distance within the range of 0 ~ 30
feet in 1 feet intervals(or 0.0 ~ 9.0 meters in 0.3 meter
intervals).
4.
Repeat the above steps 2 and 3 until the
distances are all set as desired.
■About the speaker distance
When enjoying multi-channel surround playback with
Dolby Digital and DTS sources, etc., it is ideal that the
center, surround and subwoofer speakers should be the
same distance from the main listening position as the
front speakers. By entering the distance between the
listening position and each speaker, the delay times of
center, surround and subwoofer speakers are
automatically adjusted to create an ideal listening
environment virtually as if the center, surround and
subwoofer speakers were at their ideal locations
respectively.
35