Sherwood RD-6505 Operating Instructions Manual page 26

RD-6505(A)_100223_RD-5503(g) 2010-05-11 오전 9:52 페이지 26
Dubbing the audio and video signals separately onto VIDEO 1
Example) When dubbing the VIDEO 2 video signal and the CD audio signal separately onto VIDEO 1.
1.
Select VIDEO 2 as a video recording source.
VIDEO
2.
Select CD as an audio recording source.
AUDIO
3.
Start recording on the VIDEO 1.
4.
Start play on the VIDEO 2 and the CD
respectively.
• The audio signal from the CD and the video signal
from the VIDEO 2 will be dubbed and you can enjoy
them on the TV set and from the speakers.
■Note : Be sure to observe the order of the above
steps 1 and 2.
26