Sherwood RD-6505 Operating Instructions Manual page 22

RD-6505(A)_100223_RD-5503(g) 2010-05-11 오전 9:52 페이지 22
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into
preset memory("REF 1", "REF 2") and recall the
memorized whenever you want.
1.
After performing the steps 1 ~ 4 in "Adjusting the
current channel level" procedure on page 21,
press the ENTER(/MEMORY) button.
ENTER/MEMO
• Then "1" of "REF 1" indication flickers for several
seconds.
2.
Select the desired one of REF 1 and REF 2.
TUNE
• If the preset memory disappears, perform the above
step 1 again.
3.
Confirm your selection.
ENTER/MEMO
• The adjusted channel levels have now been
memorized into the selected memory.
Recalling the memorized channel levels
1.
Press the CHANNEL LEVEL button.
CH.LEVEL
• "CAL " (or "REF 1", etc.) is displayed for several
seconds.
• If the channel level mode display disappears, press
this button again.
2.
Select the desired one of REF 1 and REF 2.
TUNE
• Then the channel levels memorized into the selected
preset memory are recalled.
22