Mount The Hard Drive - Maxtor SERIAL ATA Installation Manual

English

Mount the Hard Drive

Before mounting the hard drive in your system, determine whether you are installing the hard drive in a 3.5-inch or 5.25-inch
device bay. If you are unable to locate an available device bay, consult your system manual or system manufacturer.
3.5-inch Device Bay Installation
Many systems have an available 3.5-inch bay located adjacent to the floppy drive.
• Mount the hard drive in the 3.5-inch bay using the screws provided. See Figure 4.
Some systems may not have
enough room to plug in the cables
after the hard drive is mounted.
You may need to attach the SATA
and power supply cables first.
5 Mount the Hard Drive
Mounting
Screws
Figure 4
Typical 3.5-inch Device Bay Installation