Getting Started; Handling The Hard Drive - Maxtor HDD Installation Manual

Maxtor ATA
Ultra ATA
Hard Drive
Interface Cable
MaxBlast ®
® Mounting Screws
MaxBlast CD
This Installation
Guide
Figure 1
Included in this Kit

Getting Started

Thank you for selecting a Maxtor hard drive storage product. This
installation guide will lead you through the installation of your hard drive.
The Maxtor Hard Drive Kit includes the components shown in Figure 1.
Your computer may need some or all of these parts to complete the
installation. You will also need the tools shown in Figure 2 on page 2
including a full version of your operating system to install the hard drive
in your computer.

Handling the Hard Drive

Your hard drive should be handled with care during unpacking and
installation. Damage to hard drives is typically caused by rough
handling, shock, vibration, or electrostatic discharge (ESD). Be aware of
the following precautions when unpacking and handling your hard drive:
• Save the packing materials in case you need to return your hard drive.
• Allow the hard drive to reach room temperature before opening
the anti-static bag.
• Handle the hard drive by its sides. Do not touch the circuit board
electronics on the bottom of the hard drive.
• Do not connect or disconnect any hard drive cables when the
system is powered on.
• Do not drop, jar, or bump the hard drive.
Getting Started 1
1