Table of Contents
Advertisement
Mount the Hard Drive
Before mounting the hard drive in your system, determine whether you are installing the hard drive in a 3.5-inch
or 5.25-inch device bay. If you are unable to locate an available device bay, consult your system manual or
system manufacturer.
3.5-inch Device Bay Installation
Many systems have an available 3.5-inch bay located adjacent to the floppy drive.
– Mount the hard drive in the 3.5-inch bay using the screws provided. See Figure 4.
Some systems may not have
enough room to plug in the
cables after the hard drive is
mounted. You may need to
attach the SATA and power
supply cables first.
PAGE
5
Mounting
Screws
FIGURE 4
TYPICAL 3.5-INCH DEVICE BAY INSTALLATION
Advertisement
Table of Contents
