Hitachi RAS-18G5 Service Manual page 46

Common, etc.
There is a difference between the room
Q6
temperature setting and actual room
temperature.
Nice temperature reservation
In case of "ON" timer, the operation does
Q7
not start at a preprogrammed time but a
little earlier.
The time to start an operation is irregular
Q8
while preprogramming at the same time.
Wireless remote controller
When the room temperature setting is "16",
Q9
pressing the room temperature control button
" V " causes no transmission. At "32", pressing
" " causes no transmission either.
After selecting a "Dehumidifying" operation
Q10
mode, the fan speed mode remains "LO" fan
speed".
There may be a difference between the
A6
room temperature setting and actual room
temperature on account of the room structure,
air fl ow, etc.
If there is a difference from the room
temperature, adjust the set temperature to
keep living space at a comfortable temperature.
The "Nice temperature reservation" functions.
A7
The operation starts earlier so the room
temperature will be as set at a programmed
time.
The operation starts at most 60 minutes before
a preprogrammed time.
The "Nice temperature reservation" operates.
A8
The starting time depends on the room load.
The room temperature is settable within the
A9
range of 16 - 32 and not beyond.
At a "Dehumidifying" operation, the "LO" fan
A10
speed" is forcibly selected.
– 50 –