Administrator Settings-Sip Settings - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction
Administrator Settings—SIP Settings
The SIP settings pane lets you specify:
•
Your UrI.
•
The Default transport layer, this can be set to tCP,
UDP, tlS or auto.
•
The Proxy type can be set to Standard, alcatel,
avaya, Cisco, Microsoft, Nortel, Experimental,
Siemens.
The experimental setting is for testing purposes.
•
Outbound is not used in this version.
•
Proxy discovery can automatic or manual. In the case
of manual the proxy address must be specified by you.
•
login name and Password is required by the VCS.
Be sure to:
•
Tap Save to put settings into effect.
D14779.05 User guide EX60, TC5.0, November 2011.
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60 Using EX60
38
Scheduled meetings The Settings The Settings
User guide
Contact us
www.cisco.com