Administrator Settings-Call Settings - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction
Administrator Settings—Call Settings
The Call Settings pane lets you specify:
•
auto answer On or Off. If you set this to On, the
system will respond automatically to incoming calls.
Note that the microphone wil NOT be muted. If risk of
eavesdropping is an issue, you may want to set this
setting to Off.
•
auto answer Delay. Specify the time until your
system actually reponds to an incoming call.
•
Default Call rate. If your connection has limited
capacity you may want to use this setting.
•
Max Incoming/Outgoing Bandwidth. You may
specify these separately. May come in handy if you are
on an asymmetric connection.
•
Default Call Protcol. Specify which protocol to use as
default.
Note how the settings chosen are indicated. In the
example shown, Auto Answer is set to Off.
D14779.05 User guide EX60, TC5.0, November 2011.
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60 Using EX60
35
Scheduled meetings The Settings The Settings
User guide
Contact us
www.cisco.com