Lighting The Gas Grill With A Match; Shutdown - Dyna-Glo DGB730SNB User's Manual And Operating Manual

Dual Fuel Grill
OPERATION INSTRUCTIONS FOR GAS GRILL

LIGHTING THE GAS GRILL WITH A MATCH

Warning: Do not lean over grill when lighting. Read instructions before lighting.
1. Open the lid
2. Insert a match in the end of the match holder that is installed on the inside of the cabinet door.
3. Light the match.
4. Immediately place the lit match through the spaces in the grill gates near the ports of the burner
between the heat tents as shown. Make sure the lit match is close to the burner ports.
5. Press in the control knob that operates the burner and rotate counter-clockwise to
High position and burner should light immediately.
6. Repeat 2~5 steps to lighting the remaining burners.
7. Adjust burners to desired cooking settings.
Make sure all burner controls are off, except for the burner being lit and
the burners that have been lit.
Lighting the gas grill with the match holder.
OFF position.
Turn off LP supply at cylinder when appliance is not in use.
26