Dyna-Glo DGB730SNB User's Manual And Operating Manual page 15

Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Step 10: Insert two M6x12 screws (A) into upper front door brace (11,
10
9
labeled as AA and BB), leaving 4-6mm clearance from screw head
to the upper front door brace (11). Attach the Cart middle cross
beam (9) by placing the keyholes over the screw head (A) on the
upper front door brace (11), slide the cart middle cross beam (9)
so that the screw head is over the smaller part of keyhole.
Secure the screws but do not tighten completely this time. Install
one M6x12 screw (A), labeled as CC. Tighten the screws.
AA
CC
View from the back.
BB
Hardware Used
A M6x12 Screw Qty: 3 pcs
13