Grill Body - Dyna-Glo DGA550SSP Manual

ASSEMBLY INSTRUCTIONS
11. Attach the left door assembly (H) to the cart
body by aligning the holes in the hinge of the
left door assembly (H) with the holes in the cart
leftsidepanel(D).SecureusingfourM4x10
screws (DD). Tighten all screws. Repeat with
right door assembly (I).
Hardware Used
DD
M4x10Screw
12. Remove preassembled screws (HH) from the lid
handle (U). Attach the lid handle (U) by inserting
twoM6x25screws(HH)frominsidethelidofthe
grillbody(O),throughthelidhandlebezels(V),
into the lid handle (U) and tightening securely.
Hardware Used
HH
M6x25Screw
13. Slip main burner control knobs (M) and side/
rear burner control knob (N) onto the valve
stems located on the front control panel of the
grill body (O).
11
D
x8
H
12
1
x2
13
O
N
11
DD
1
1
U
V
1
HH
M
O