Dyna-Glo DGB730SNB User's Manual And Operating Manual page 11

Step 3: Attach cart rear vertical beam (10) to the middle of the back
in bottom shelf (1) by using one M6x12 screw (A). Tighten the
screw.
Hardware Used
A M6x12 Screw
Step 4: Insert one M6x12 screw (A) into each of the rear holes of the
cart right side panel and cart rear vertical beam (5 & 10),
leaving 4-6mm clearance from screw head to the right side
panel and cart rear vertical beam (5 & 10). Attached one of the
cart rear panels (12) by sliding the keyholes in the cart rear
panel over the inserted screws and then push with force.
Secure the cart rear panel (12) to the bottom shelf (1) by using
two M6x12 screws (A). Tighten the two M6x12 screws on cart
right side panel and cart rear vertical beam (5 & 10).
Hardware Used
A M6x12 Screw
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Qty: 1 pcs
Qty: 4 pcs
9
3
10
13
1
10
4
5
10
12
12
5