Samsung DVD-909 Service Manual page 7

Precautions
1-5 Pick-up disassembly and reassembly
1-5-1 Disassembly
1) Remove the power cable.
2) Switch SW3 on deck PCB to ÒOFFÓ before
removing the FPC.
( Inserted into Main PCB CN6. See Fig. 1-4)
3) Disassemble the deck.
4) Disassemble the deck PCB.
Note : If the assembly and disassembly are not done in correct sequence, the Pick-up may be damaged.
1-6
SW3
OFF
ON
1-5-2 Assembly
1) Replace the Pick-up.
2) Assemble the deck PCB.
3) Reassemble the deck.
4) Insert FPC into Main PCB CN6 and switch SW3 on
deck PCB to ÒONÓ. (See Fig 1-4)
FPC
Fig. 1-4
TO MAIN PCB
(CN6)
Samsung Electronics