Samsung DVD-909 Service Manual page 172

DVD-YURO909/709 11/4/95 10:01 AM
S
etting Up Audio Options
1.
1.
2.
2.
How to make the SETUP MENU
disappear or return to menu
screen during set up.
Press RETURN button.
• Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby
NOTE
Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights reserved.
36
Page 36
D D V V
D D V V
1. Press the SETUP button
1.
when in play or stop mode.
2. Use the UP/DOWN button to
2.
select AUDIO OPTIONS. Then
press the ENTER button.
3.
Use the UP/DOWN button to
3.
select the desired item. Then
press the ENTER button.
AUDIO OPTIONS
1 DOLBY DIGITAL OUT
2 MPEG-2 DIGITAL OUT
3 DTS
4 DYNAMIC COMPRESSION
5 2X SCAN AUDIO
6 SPEAKER SETUP
DOLBY DIGITAL OUT/
2 DIGITAL OUT
A digital surround sound format
that is recorded by Dolby
Digital/MPEG-2 Audio. Select the
suitable output signal type of DIGI-
TAL AUDIO OUT/MPEG-2 DIGI-
TAL OUT (Bitstream/PCM) during
playback.
DTS
This program features discrete 5.1
channel sound-track and must be
played through DTS-capable
equipment. When played through
DTS equipment, sound will be
heard from all five system speak-
ers and a subwoofer.
DYNAMIC COMPRESSION
Compresses the dynamic range
(quietest to loudest sound) of a
disc's soundtrack. This function is
disc-dependent, and may not work
with all DVDs.
2X SCAN AUDIO
Turns audio off or on when a disc
is in 2X playback mode.
D D
D D
SPEAKER SETUP (DVD-909
only)
To select the SPEAKER SETUP to
hear surround sound.
4. Use the UP/DOWN button to
4.
select the desired item. Then
press the ENTER button.
DOLBY DIGITAL OUT
PCM : Converts to PCM (2CH)
1
48kHz/16Bit audio. Select PCM
when using the Analog Audio
Outputs.
PCM
BITSTREAM : Converts to Dolby
2
PCM
Digital BITSTREAM (1CH-5.1CH).
OFF
Select BITSTREAM when using
ON
OFF
the Digital Audio Output.
909 only
MPEG-2 DIGITAL OUT
PCM : Converts to PCM (2CH) of
1
48kHz/16Bit. Select PCM when
MPEG-
using the Analog Audio Outputs.
2 BITSTREAM : Converts to
MPEG-2 Audio BITSTREAM
(1CH-7.1CH). Select BITSTREAM
when using the Digital Audio Output.
Note : Be sure to select the correct
DTS
1 ON : Outputs DTS BITSTREAM via
digital output only. Select DTS when
connecting to a DTS DECODER.
2 OFF : Doesn't output digital signal.
DYNAMIC COMPRESSION
1 ON : To select dynamic com-
pression.
OFF : To select the standard range.
2
2X SCAN AUDIO
1 ON : Turns 2X audio on.
2 OFF : Turns 2X audio off.
Though 2X SCAN AUDIO is ON in
the SETUP MENU, no sound will be
heard on discs which are recorded
with LPCM, DTS or MPEG-2 AUDIO.
SPEAKER SETUP
Refer to page 37.
Digital Output or no audio
will be heard.