Samsung DVD-909 Service Manual page 54

Disassembly/Reaasembly
5-4-3 Chassis-Main Parts Removal
1) Lift up the Gear-Tray Œ, remove 1 Screw ´ and lift up the Gear-Cam Center ˇ.
2) Lift up the Belt-Pulley ¨, remove 1 Screw ˆ and lift up the Pulley-Gear Ø.
3) Remove 1 Screw ∏ and lift up the Gear-Tray A " and Gear-Cam Sub '.
4) Remove 2 Screws ˝ and disassemble the AssÕy-Motor Load Ô.
and disassemble the Lever-Open S/W Ò.
5) Remove 1 Screw
6) Lift up the Shaft-Syncro Ú and remove the 2 Gear-Syncro Æ in both directions.
¨ BELT - PULLEY
ˇ GEAR - CAM CENTER
´ 1 SCREW
ˆ 1 SCREW
' GEAR - CAM SUB
Ø PULLEY - GEAR
ΠGEAR - TRAY
˝ 2 SCREWS
" GEAR - TRAY A
∏ 1 SCREW
ˇ GEAR - CAM CENTER
TIMING
ALIGN TWO ARROWS
' GEAR - CAM SUB
Æ GEAR - SYNCRO
Ú SHAFT - SYNCRO
Æ GEAR - SYNCRO
Ò LEVER - OPEN S/W
1 SCREW
Ô ASS'Y - MOTOR LOAD
Fig. 5-15 Chassis-Main Parts Removal
Samsung Electronics 5-15