Samsung DVD-909 Service Manual page 167

DVD-YURO909/709 11/4/95 10:01 AM
U
sing the Zoom and 3D Sound
1.
1.
2.,2
2.,2
Using the Master Volume Control Function
Press the VOLUME CON. button. Use the UP/DOWN button to
select a suitable volume.
• Master Volume Control function lets you adjust the volume of the
player's output. This is useful for matching the player's output level
to other equipment in your system.
• Master Volume Control function on CD titles with DTS will not work
under VOLUME : 96 level.
• When the Dolby DIGITAL OUT or MPEG-2 DIGITAL OUT is set to
BITSTREAM in the SETUP MENU, the Volume Control function
will not work.
• 3D Sound is possible only on discs recorded using DOLBY SURROUND or DOLBY DIGITAL. However, some of these discs do not
contain the rear sound signal.
• Depending on the disc, the Zoom and 3D Sound function may not work.
• Certain audio feature of this product manufactured under a license from Desper Products, Inc., Spatializer
NOTE
trademarks owned by Desper Products Inc.
• DTS : A digital surround sound format that, like Dolby Digital, provides six separate audio channels. To hear a DTS soundtrack, you
must connect the player's DIGITAL AUDIO OUT jack to a compatible DTS-equipped receiver.
• LPCM : Linear Pulse Code Modulation-a digital recording process.
Page 31
D D V V D D / /
D D V V D D / /
1
1
V V C C D D
V V C C D D
Using the Zoom Function (DVD/VCD)
1. During playback or pause mode, press the
1.
ZOOM button on the remote. The square
frame will be displayed on screen.
2.
Use the UP/DOWN or LEFT/RIGHT button to
2.
select the part of the screen you want to zoom.
3. Press the ENTER button.
3.
- During DVD playback, press ENTER to zoom in 2X/4X/nor-
mal in order.
- During VCD playback, press ENTER to zoom in 2X/normal
in order.
Using the 3D Sound Function
The simulated surround effect (SPATIALIZER N-2-2)
depends on the disc contents. If you connect the
unit to your stereo system, you can enhance sound
quality and produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the analog
outputs.
(Discs which are recorded with LPCM or DTS will
not work. When the DOLBY DIGITAL OUT or
MPEG-2 DIGITAL OUT is set to BITSTREAM in the
SETUP MENU, the 3D Sound function will not
work.)
1 During playback, press the 3D SOUND button.
1
The 3D SOUND mark will be displayed on
screen. (Be sure the DOLBY DIGITAL OUT
and MPEG-2 DIGITAL OUT are set to PCM.)
2
Press the LEFT/RIGHT button to turn the 3D
2
Sound feature on or off.
®
and circle-in-square are
31