Samsung DVD-909 Service Manual page 156

DVD-YURO909/709 11/4/95 10:00 AM
P
laying a Disc (Cont d)
Several options are available during DVD playback.
2.
2.
5.
5.
1.
1.
3.,4.,5.
3.,4.,5.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up where you left off (unless
the disc is removed, the STOP button is pressed twice or the player is unplugged.).
• If the player is left for 5 minutes in pause mode, it will stop.
• The power is automatically turned off after approximately 30 minutes have elapsed in the stop mode (auto power-off feature).
NOTE
• If the player is left in the stop mode for more than one minute without any user interaction, a screensaver will be activated, and the
TV screen will fade in and fade out repeatedly. Press PLAY button to resume normal play.
20
Page 20
D D V V D D / / V V
D D V V D D / / V V
5.
5.
3.
3.
C C D D / / C C D D
C C D D / / C C D D
1. Stopping Playback
1.
Press the STOP button in playback.
2.
Removing Disc
2.
Press the OPEN/CLOSE button.
3.
Pausing Playback
3.
Press the PLAY/PAUSE or STEP button on the remote
during playback.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE button once again.
4. Step Motion Playback (Except CD)
4.
Press the STEP button on the remote or turn JOG dial
(DVD-909 only) on the front of the DVD player during
playback.
- Each time the button is pressed, a new frame will
appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE to resume normal playback.
(You can only perform step motion playback in the for-
ward direction.)
5. Slow Motion Playback (Except CD)
5.
Press the FWD or REV SEARCH button on the remote or
turn the SHUTTLE dial (DVD-909 only) on the front of the
DVD player during PAUSE or STEP mode.
- By pressing or shuttling, you can select slow motion
playback for 1/2, 1/4 or 1/8 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE to resume normal playback.
- When playing a VCD, the reverse slow motion playback
will not work.