Samsung DVD-909 Service Manual page 56

5-4-5 Ass'y- Deck Parts Removal
1) Remove 3 Screws Œ and disassemble 3 Holder-Cams ´.
2) Disassemble the Rack-Slide ˆ and AssÕy-Pickup Ø, 2 Screws ¨ while simultaneously removing the
Shaft-P/U ˇ.
3) Remove 3 Screws ∏ and disassemble the AssÕy-Motor Spindle ".
4) Remove the Washer-Plain ' and disassemble the AssÕy-Gear Feed AU/AL ˝.
5) Remove the Washer-Plain Ô and disassemble the Gear-Feed B
6) Remove the Washer-Plain Ò and disassemble the AssÕy-Gear Feed CU/CL Ú.
" ASS'Y - MOTOR
SPINDLE
∏ 3 SCREWS
ˇ SHAFT - P/U
Ø ASS'Y - PICK UP
ˆ RACK - SLIDE
¨ 2 SCREWS
Samsung Electronics
´ HOLDER - CAM
Π2 SCREWS
Fig. 5-17 Ass'y- Deck Parts Removal
.
ˇ SHAFT - P/U
Disassembly/Reaasembly
˝ ASS'Y - GEAR FEED AU/AL
' WASHER - PLAIN
GEAR - FEED B
Ô WASHER - PLAIN
Ú ASS'Y GEAR - FEED CU/CL
Ò WASHER - PLAIN
5-17